Metrologic TECH 7 Manuale Utente Scaricare il pdf (Pagina 167)

Miscellaneous Features

SECTION N CUSTOM DEFAULTS/SERIAL PROGRAM MODE

Custom Keyboard FR1

³997000

Custom Terminal FR1

³997001

For Serial Program Mode, all commands must be framed by an STX (02 Hex) and ETX (03 Hex).

To recall defaults:

1. Transmit <STX>999999<ETX> through the Serial Port. This will put the

scanner in serial program mode. Scanning will be suspended and the

scanner will respond with an

ACK (06 Hex).

2. Transmit <STX>999998<ETX> through the Serial Port. This is the Recall

Default bar code in the MetroSelect guide.

The scanner will respond with an ACK (06 Hex).

3. Transmit <STX>999999<ETX> through the Serial Port. This will cause

the scanner to exit program mode and save the new settings. The

scanner will beep 3 times and send an ACK (06 Hex).

If at anytime, the scanner cannot recognize a command, it will respond with a NAK (15 Hex).

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 187 188

Nessun commento

Metrologic TECH 7 Manuale Utente Pagina 167